Theater seats and chairs for home, theaters, auditorium, school and movie cinema, Celebrity Seating.
Wholesale theater seating, home theater seating.
CelebritySeating.com Home Theater Seating, Seats and Chairs.

Festival Fixed Back Theater Seating Installation Instructions.


Installation instructions for the Celebrity Seating Festival fixed back chair.
These instructions are also basically the same for installing other brands of fixed back seating, such as:
Irwin Seating's Marquee theater seating. Fixed back.
Irwin Seating's Citation theater seating. Fixed back.
Mobiliario Seating's Convention theater seating. Fixed back. As well as others.
As you learn how the chairs goes together, you will see that it is quite simple.
This explains why so many chairs are manufactured with this same type of similar assembly instructions.

Theater Seating Festival fixed back installation guide

The Festival fixed back chair is made to have its feet installed at a width of 22-inch to 22 1/8th-inches center to center apart from each other.

Theater Seating Festival fixed back installation guide

Make sure that both the front and the back are the exact same distance apart.

Theater Seating Festival fixed back installation guide

Above is pictured the hardware you will receive, and use to assemble the Festival fixed back theater seating.
Make sure you use the washers, the star washers, and the locking washers during the assembly.
On the Festival the hardware is found in the holes where they will eventually be used. In other words there is not a bag of hardware.
The screws and washers are actually on the chairs various parts [the center standard, the end standard], when you remove them out from the shipping box.

Theater Seating Festival fixed back installation guide

Above is one of the chairs legs. It is a center leg. Also called a center standard. It consists of an armrest, the leg, the wing, the ear, and the foot.

Theater Seating Festival fixed back installation guide

Above is a end leg, with an end panel. The above picture is of the backside of this paneled end leg also known as a paneled end standard.
Notice the 2 screws, this is where the back attaches to the paneled end standard.

Theater Seating Festival fixed back installation guide

On this center leg, you can see the 2 screws where the back attaches to the center standards wing.

Theater Seating Festival fixed back installation guide

Another view of the center leg, where you again, can see the 2 screws where the back attaches to the center standards wing.

Theater Seating Festival fixed back installation guide

Mount the legs onto your floor. If screwing or bolting the chairs feet to plywood, we recommend a minimum of 2 sheets of 3/4-inch plywood, making
up a thickness of 1 1/2-inches. Floor anchors need to be purchased locally. If installing the chairs on to a concrete floor, then concrete anchors need to be used.
Place the foot on top of carpet. You may want to cut out a small plug out of the carpeting from where you are putting the floor anchor.
This way you do not get a run in the carpet when you are drilling.
After the legs are mounted onto the floor, then place one of the seat back screws into the bottom hole on the center standard wing, and one into the bottom hole on the
next center standard wing [or paneled end standard wing, if you are assembling the chair on the end of the row].

Theater Seating Festival fixed back installation guide

Here is a picture of the screw placed into the bottom hole on the end standard. Do not tighten these screws, yet.

Theater Seating Festival fixed back installation guide

Approaching from behind, with the seats back held like shown, place the notched slot located on the bottom of the chairs back metal wing, on to the bottom screws on the legs wing.

Theater Seating Festival fixed back installation guide

While the chairs back is resting on the screws, gently push the seats back forward. Line up the hole on the seats back wing with the hole in the leg.
Notice that you can choose one of holes to place the top screw through. This placement will determine the angle of the fixed back.
It is common to have seats close to the front of the room, near 6the screen for example, to be a little more reclined than the seats in the back of the room.
However, this is your preference Tight back-to-back spacing may lend you to installing the back into it's most upright position.

Theater Seating Festival fixed back installation guide

Here is what it looks like on a paneled end standard.
Just finger tighten these back wing screws for now. You will tighten them in a few minutes.

Theater Seating Festival fixed back installation guide

Notice the 'ear' on this center standard. This is where the seat bottom assembly, or the seat bottom cushion attaches. No nut is needed as the holes on the ears are threaded.

Theater Seating Festival fixed back installation guide

Notice the 'ear' on this end standard. This is where the seat bottom assembly, or the seat bottom cushion attaches. No nut is needed as the holes on the ears are threaded.

Theater Seating Festival fixed back installation guide

The installation of the seat bottom is pretty straightforward.
As you can see here, in this picture, there is an ear on the seat bottom assembly, this goes on top of the ear on the standard / leg.
The bolt is screwed in from the top. And again the hole in the leg's ear hole is threaded so no nut is required. Tighten these bolts snuggly, but not all the way, yet.

Theater Seating Festival fixed back installation guide

Here is what it should look like after you have screwed the bolt in.

Theater Seating Festival fixed back installation guide

Here is what it should look like after you have screwed the bolt in.

Theater Seating Festival fixed back installation guide

Now make sure that the seat bottom goes up and down smoothly. The seat bottom lifts by gravity. Make any adjustments before you tighten everything.
Now tighten all the screws and bolts.
Did you install the seats feet over carpeting? Then make sure that you check in a few days and make sure that the floor bolts are tight.
The compressed carpet and cause the floor screws to be loose.
These installation instructions are provided as a help. Installer is responsible for the safe installation of the seating.
Now relax in your Festival fixed back theater seating chair. It will provide you with many years of use and enjoyment.

Please call for wholesale theater seating pricing.
Email us with inquiries regarding commercial and/or wholesale theater seating at CelebritySeating@gmail.com
Or call (727) 798-6949 or (727) 572-4453 and ask for Wil.

Site Website and contents Copyright 2002-2010, CelebritySeating.com, All Rights Reserved Worldwide.
Any unauthorized duplication is strictly prohibited.
CelebritySeating.com, USA

Home Page CelebritySeating.com Celebrity Seating Theater Seating
CelebritySeating.com Home Theater Seating, Seats and Chairs.



Theater seating, chairs and seats for school, theater, auditorium, media rooms, theatre rooms, and movie cinema. Celebrity Seating.